高低温湿热试验箱PL-4J

高低温湿热试验箱PL-4J

高低温湿热试验箱  

ProductName: High and Low Temperature Humidity and Heat Test Chamber

品牌：爱斯佩克

Brand:Aispec

型号：PL-4J

Model:PL-4J

工作原理：

通过以下示意图内的各部分的循环运行来控制箱内的温湿度变化。控制方式采用的是，平衡调温调湿方式（BTHC系统）。工作原理是，通过综合平衡加热器，加湿器，冷却器（除湿器）的能力，来控制温湿度。

1.通过加湿盘来对箱内增加湿度。

2.通过冷却器（除湿器）来进行除湿，使箱内空气温度下降。

3.通过加热器来调节箱内的空气温度。

试验箱内通过1～3步骤的反复循环进行，来调节箱内的温度和湿度。

※根据设定好的温度，湿度条件，设备会自动调整加湿器，冷却器，加热器的出力状态。

working principle:

Thetemperature and humidity changes in the box are controlled by the circulationoperation of each part in the following schematic diagram. The control methodadopts the balanced temperature and humidity control method (BTHC system). Theworking principle is to control temperature and humidity by comprehensivelybalancing the capabilities of heaters, humidifiers, and coolers(dehumidifiers).

1.Increase the humidity in the box through the humidifying pan.

2.Dehumidify through the cooler (dehumidifier) to reduce the air temperature inthe box.

3.Adjust the air temperature in the box through the heater.

Thetemperature and humidity in the test box are adjusted through repeated cyclesof 1 to 3 steps.

※According to the set temperature and humidity conditions, the devicewill automatically adjust the output status of the humidifier, cooler andheater.

图片

技术参数：

Technical Parameters:

1.  温度性能：

   Temperature performance:

图片

2. 湿度性能

   Humidity performance

图片

基本应用：

主要应用在汽车电子，电子部品，信息通讯，新能源，机电产品跟科研单位，通过环境试验技术，提供产品的可靠性。

Basic application:

Mainlyused in automotive electronics, electronic parts, information communications,new energy, electromechanical products and scientific research units, throughenvironmental testing technology, to provide product reliability.