供应进口便携式充电平口机TSM-1000

供应进口便携式充电平口机TSM-1000

供应进口便携式充电平口机的详细描述：

OD MOUNT / BATTERY 外夹式充电电池驱动

is one of the smallest designed facing tools on the market today. The machine is powered by an air cooled 18V-Li Metabo battery motor and the total working weight of the machine is 6 lbs. The design of this machine makes it easy to use on job sites – making hard-to-reach areas easily accessible due to it’s small size. It has a battery powered motor, which will last for 2hours, with a 15 min. recharge. Collets are made from Stainless Steel material and are self-locking into the cutter to hold the collets in place.

TSM-1000便携式平口机是目前市场上最小的平口机之一。该机型由18V的Metabo锂电池电钻驱动，整机的重量约为6磅（2.6KG）。这种机型适用于安装施工现场，由于它的尺寸很小，尤其方便在空间窄小的区域工作。

电钻通过电池驱动可以持续工作2个小时以上，并且充电时间只要15分钟。夹具由不锈钢制作成，并且可以自锁于排屑 套筒上将夹具固定在正确位置。

PERFORMANCE

Size range 1/8” to 1” (3.175 mm - 25.4 mm)

18V Metabo air cooled Li powered battery motor

Easy replacement of collets and size ranges

Uses Stainless Steel collet set (upper / lower)

6 lbs. (2.6 kg) approximate working weight

Faces most metals and plastics, including high nickel materials

Tool bit designed to keep chip out of polished ID

Tool bits are designed to work on the following materials: stainless steel, inconel, hastelloy, carbon steels, aluminum, and a variety of other alloys.

性能 管径范围（外径）：mm-25.4mm)； 18V的Metabo锂电池电钻驱动； 两面式刀片让刀片寿命更长； 夹具使用不锈钢材料，尺寸多且更换方便； 重量约6磅（2.6公斤），方便现场操作； 可以切削大多数的金属和塑胶，包括高镍合金材料； 设计的刀片使切屑避开管内壁； 刀片可以切削以下几种材料：不锈钢，铬镍铁合金，镍基合金，碳钢，铝合金以及其他的一些合金材料

Battery charger: 电钻

110V;60Hz US Style / 220V;50Hz CE Compliant110V

交流；60Hz 美国标准/220V 交流；50Hz 通过CE认证

PART NUMBERS / ORDER INFO:

配件型号/订单信息

TSM-1000 Machine Kit Includes: Machine, Battery charger，Standby battery, Tool Bits(2), Tooling, Manual and Case

标配： 平口机，充电器，备用电池，2个随机刀片，工具，手册和特制手提箱

咨询热线4000-999-800